Details

---

BUY TL082CP. https://www.utsource.net/itm/p/12607392.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	-	卤4	-	卤18	V
Input Voltage Range	VI	-	卤13	-	卤15	V
Output Voltage Swing	VO	No Load	卤12	-	卤14	V
Input Offset Voltage	VOS	25掳C	-1	2	7	mV
Input Bias Current	IB	25掳C	-	45	-	nA
Input Offset Current	IOS	25掳C	-	6	-	nA
Input Resistance	RI	25掳C	-	1	-	G惟
Differential Input Voltage	VID	Continuous	-	30	-	V
Slew Rate	SR	25掳C	-	13	-	V/渭s
Large Signal Bandwidth	fT	25掳C, Vo=10Vpp	-	3	-	MHz
Power Consumption	PD	Per Amplifier	-	1.3	-	mW

Instructions for Use:

1. Power Supply:

   • The TL082CP operates with a dual supply voltage ranging from 卤4V to 卤18V.
   • Ensure that the power supply is stable and within the specified range to avoid damage.

2. Input Signals:

   • The input voltage range should be between 卤13V and 卤15V to prevent clipping or distortion.
   • Avoid applying differential input voltages greater than 30V to prevent damage to the device.

3. Output Signals:

   • The output voltage swing is typically 卤12V to 卤14V with no load. Ensure that the load impedance is appropriate to maintain this swing.

4. Biasing:

   • The input bias current is typically 45nA at 25掳C. Design the input circuitry to account for this bias current to avoid errors in the signal.

5. Offset Voltage:

   • The input offset voltage can vary from -1mV to 7mV at 25掳C. Use trimming techniques if precise offset adjustment is required.

6. Slew Rate:

   • The slew rate is 13V/渭s at 25掳C. This limits the maximum rate of change of the output voltage and should be considered when designing high-frequency circuits.

7. Bandwidth:

   • The large signal bandwidth is 3MHz at 25掳C with a 10V peak-to-peak output. Ensure that the operating frequency is within this range for optimal performance.

8. Power Consumption:

   • Each amplifier consumes approximately 1.3mW at 25掳C. Consider this when designing power-efficient circuits.

9. Handling:

   • Handle the TL082CP with care to avoid static discharge, which can damage the device. Use proper ESD protection practices.

10. Mounting:

    • Mount the TL082CP on a PCB with adequate heat dissipation to ensure reliable operation. Avoid placing it near high-temperature components.

11. Storage:

    • Store the TL082CP in a dry, cool place to prevent moisture damage. Follow recommended storage conditions as specified by the manufacturer.

(For reference only)