Details

---

BUY TIP115 https://www.utsource.net/itm/p/12607406.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCE	-	-	60	V
Emitter-Collector Voltage	VEC	-	-	60	V
Base-Emitter Voltage	VBE	-	2.5	3.5	V
Collector Current	IC	-	5	15	A
Base Current	IB	-	-	10	A
Power Dissipation	PT	-	-	130	W
Junction Temperature	TJ	-40	-	150	掳C
Storage Temperature	TSTG	-40	-	150	掳C

Instructions for Using TIP115

1. Mounting:

   • Ensure proper heat sinking to maintain junction temperature within safe limits.
   • Use a thermal compound between the transistor and the heat sink for better thermal conductivity.

2. Biasing:

   • The base-emitter voltage (V_BE) is typically around 2.5V to 3.5V.
   • Use a current-limiting resistor in series with the base to prevent excessive base current.

3. Current Handling:

   • The maximum collector current (I_C) is 15A, but continuous operation should be limited to 5A to avoid overheating.
   • For higher currents, ensure adequate cooling and derate the power dissipation accordingly.

4. Voltage Ratings:

   • Do not exceed the maximum collector-emitter voltage (V_CE) of 60V.
   • Similarly, do not exceed the maximum emitter-collector voltage (V_EC) of 60V.

5. Power Dissipation:

   • The maximum power dissipation (P_T) is 130W. Ensure that the power dissipation does not exceed this limit to avoid damage to the transistor.

6. Temperature:

   • The junction temperature (T_J) should be kept between -40掳C and 150掳C.
   • The storage temperature (T_STG) should also be within the same range.

7. Storage:

   • Store the TIP115 in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid mechanical stress or damage to the leads.

8. Testing:

   • Before installing the TIP115 in a circuit, test it using a multimeter to ensure it is functioning correctly.
   • Check for continuity and resistance values to verify the integrity of the transistor.

9. Safety:

   • Always use appropriate safety measures when working with high voltages and currents.
   • Ensure that the circuit is properly insulated and grounded to prevent electrical hazards.

(For reference only)