Details

---

BUY TFS764HG https://www.utsource.net/itm/p/12607409.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	2.7	-	5.5	V
Operating Current	Iop	-	1.0	2.0	mA
Peak Current	Ipeak	-	2.5	3.5	mA
Output Power	Pout	10	15	20	dBm
Frequency Range	f	2.4	-	2.5	GHz
Modulation	-	-	GFSK	-	-
Data Rate	Rb	1	-	2	Mbps
Standby Current	Istby	0.1	-	0.5	渭A
Operating Temperature	Topr	-40	-	85	掳C
Storage Temperature	Tstg	-55	-	125	掳C

Instructions for TFS764HG

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 5.5V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Operating Current:

   • The typical operating current is 1.0 mA, with a maximum of 2.0 mA. Ensure your circuit can handle this current draw.

3. Peak Current:

   • The peak current should not exceed 3.5 mA to prevent damage to the component.

4. Output Power:

   • The output power ranges from 10 dBm to 20 dBm. Adjust the power level based on your application requirements.

5. Frequency Range:

   • The TFS764HG operates in the 2.4 GHz to 2.5 GHz frequency band. Ensure your application is within this range.

6. Modulation:

   • The device supports Gaussian Frequency Shift Keying (GFSK) modulation. Configure the modulation settings according to your communication protocol.

7. Data Rate:

   • The data rate can be set between 1 Mbps and 2 Mbps. Choose the appropriate data rate for your application.

8. Standby Current:

   • In standby mode, the current consumption is very low, typically 0.1 渭A to 0.5 渭A. Use this mode to conserve power when the device is not actively transmitting.

9. Temperature:

   • The operating temperature range is -40掳C to 85掳C. Ensure the device is used within this range to avoid thermal stress.
   • The storage temperature range is -55掳C to 125掳C. Store the device in a suitable environment to maintain its integrity.

10. Handling:

    • Handle the TFS764HG with care to avoid static discharge and physical damage.
    • Follow proper soldering techniques to ensure reliable connections.

11. Testing:

    • Before deploying the device in a final application, conduct thorough testing to ensure it meets all performance specifications.

12. Compliance:

    • Ensure that your application complies with relevant regulatory standards and guidelines for radio frequency devices.

(For reference only)