Details

---

BUY XR2204CP https://www.utsource.net/itm/p/12607416.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	4.5	-	18	V
Supply Current	ICC	No load	-	6	-	mA
Output Voltage Swing	VOS	Load = 0惟 to 2k惟	0	-	Vcc-2	V
Frequency Range	f	Nominal	0.01	-	1	MHz
Duty Cycle Range	D	Nominal	0.01	-	0.99	-
Rise Time	tr	Vout = 0V to Vcc-2V	-	100	-	ns
Fall Time	tf	Vout = Vcc-2V to 0V	-	100	-	ns
Propagation Delay	tpHL	Input to output	-	300	-	ns
Power Dissipation	PD	Maximum	-	-	625	mW
Operating Temperature	Toper	-	-40	-	85	掳C
Storage Temperature	Tstg	-	-55	-	150	掳C

Instructions for XR2204CP

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) between 4.5V and 18V to pin 16.
   • Ensure a bypass capacitor (typically 0.1渭F) is placed close to the power pins for stability.

2. Frequency Setting:

   • The frequency can be set using external resistors and capacitors connected to the timing pins (pins 7, 8, and 9).
   • Refer to the datasheet formulas for precise frequency calculation based on component values.

3. Duty Cycle Adjustment:

   • Adjust the duty cycle by modifying the resistor connected between pin 5 and ground or using an external control voltage at pin 5.

4. Output Configuration:

   • The output can drive loads up to the maximum current specified under the supply conditions.
   • For optimal performance, ensure the load resistance is within the recommended range.

5. Thermal Considerations:

   • Keep the operating temperature within -40掳C to 85掳C.
   • For extended temperature ranges, refer to the storage temperature limits.

6. Handling Precautions:

   • Handle with care to avoid damage from electrostatic discharge (ESD).
   • Follow standard safety guidelines when working with electronic components.

For detailed design considerations and specific applications, refer to the full datasheet of the XR2204CP.

(For reference only)