Details

---

BUY 2SC3242 https://www.utsource.net/itm/p/12607434.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Collector-Emitter Voltage	VCEO	-	-	80	V	Maximum voltage between collector and emitter with the base open.
Collector-Base Voltage	VCBO	-	-	100	V	Maximum voltage between collector and base with the emitter open.
Emitter-Base Voltage	VEBO	-	-	5	V	Maximum voltage between emitter and base with the collector open.
Collector Current	IC	-	-	3	A	Maximum continuous collector current.
Power Dissipation	PT	-	-	65	W	Maximum power dissipation at TA = 25掳C.
DC Current Gain	hFE	20	70	200	-	DC current gain (IC = 150mA, VCE = 10V).
Transition Frequency	fT	-	30	-	MHz	Transition frequency (IC = 150mA, VCE = 10V).
Storage Temperature Range	TSTG	-55	-	150	掳C	Temperature range for storage.
Operating Temperature Range	TA	-55	-	150	掳C	Temperature range for operation.

Instructions:

1. Handling and Storage:

   • Store the 2SC3242 in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid mechanical stress on the leads and body.

2. Mounting:

   • Ensure proper heat sinking when mounting the transistor to dissipate heat effectively.
   • Use thermal compound between the transistor and the heat sink for better thermal conductivity.

3. Biasing:

   • Ensure that the biasing circuitry is designed to keep the transistor within its safe operating area (SOA).
   • Avoid exceeding the maximum ratings for V_CEO, V_CBO, V_EBO, I_C, and P_T.

4. Testing:

   • When testing the transistor, use a suitable current-limiting resistor to prevent damage from excessive current.
   • Measure the DC current gain (h_FE) under the specified conditions to ensure it falls within the typical range.

5. Applications:

   • The 2SC3242 is suitable for high-power amplification and switching applications.
   • It can be used in audio amplifiers, power supplies, and other circuits requiring high current and power handling capabilities.

6. Safety:

   • Always follow proper safety guidelines when working with high voltages and currents.
   • Use appropriate protective equipment and ensure the circuit is powered down before making any connections or modifications.

(For reference only)