Details

---

BUY L6004L3 https://www.utsource.net/itm/p/12607442.html

Parameter	Description	Min	Typ	Max	Unit
Input Voltage (VIN)	Operating input voltage range	4.5	-	32	V
Output Voltage (VOUT)	Regulated output voltage	-	5.0	-	V
Output Current (IOUT)	Continuous output current	-	1.5	2.0	A
Dropout Voltage (VDROP)	Voltage difference between VIN and VOUT at IOUT = 1.5A	-	0.4	-	V
Quiescent Current (IQ)	Supply current with no load	-	5.0	-	mA
Shutdown Current (ISD)	Supply current in shutdown mode	-	0.1	-	渭A
Operating Temperature (TOPR)	Operating junction temperature range	-40	-	125	掳C
Storage Temperature (TSTG)	Storage temperature range	-65	-	150	掳C
Thermal Resistance (胃JA)	Junction-to-ambient thermal resistance	-	50	-	掳C/W

Instructions for Using the L6004L3

1. Input Connection:

   • Connect the input voltage (VIN) to the IN pin.
   • Ensure the input voltage is within the operating range of 4.5V to 32V.

2. Output Connection:

   • Connect the output voltage (VOUT) to the OUT pin.
   • The regulated output voltage is 5.0V.

3. Ground Connection:

   • Connect the ground (GND) to the GND pin.
   • Ensure a solid ground connection to maintain stability and performance.

4. Capacitor Requirements:

   • Place a 1渭F ceramic capacitor close to the IN pin to filter input noise.
   • Place a 1渭F ceramic capacitor close to the OUT pin to stabilize the output.

5. Thermal Management:

   • Ensure adequate heat dissipation, especially when operating at high output currents.
   • The thermal resistance (胃JA) is 50掳C/W, so consider a heatsink if necessary.

6. Shutdown Function:

   • To enable the shutdown function, connect the SHDN pin to GND.
   • To activate the regulator, leave the SHDN pin open or connect it to VIN.

7. Operating Temperature:

   • The device operates within a temperature range of -40掳C to 125掳C.
   • Avoid exceeding these limits to prevent damage or reduced performance.

8. Storage Temperature:

   • Store the device in a temperature range of -65掳C to 150掳C.

9. Handling Precautions:

   • Handle the device with care to avoid static discharge.
   • Follow proper soldering techniques to ensure reliable connections.

(For reference only)