Details

---

BUY STD40NF02L https://www.utsource.net/itm/p/12607460.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Drain-Source Voltage	VDS	-	-	20	V	-
Gate-Source Voltage	VGS	-10	-	4	V	-
Continuous Drain Current	ID	-	-	40	A	TC = 25掳C
Continuous Drain Current	ID	-	-	27	A	TC = 75掳C
Pulse Drain Current (t=10ms)	ID(p)	-	-	80	A	TC = 25掳C
Power Dissipation	PTOT	-	-	90	W	TC = 25掳C
Junction Temperature	TJ	-	-	150	掳C	-
Storage Temperature Range	Tstg	-55	-	150	掳C	-
Gate Charge	QG	-	36	48	nC	VGS = 10V, ID = 10A
Input Capacitance	Ciss	-	1040	1450	pF	VDS = 10V, f = 1MHz
Output Capacitance	Coss	-	260	350	pF	VDS = 10V, f = 1MHz
Reverse Transfer Capacitance	Crss	-	120	160	pF	VDS = 10V, f = 1MHz
RDS(on) at 25掳C	RDS(on)	-	5.5	7.5	m惟	VGS = 4V
RDS(on) at 125掳C	RDS(on)	-	7.5	10	m惟	VGS = 4V

Instructions for Use:

1. Handling Precautions:

   • The STD40NF02L is sensitive to electrostatic discharge (ESD). Use proper ESD protection when handling the device.
   • Avoid exposing the device to temperatures outside the specified storage temperature range.

2. Mounting:

   • Ensure that the device is mounted on a heatsink if operating near its maximum power dissipation to maintain junction temperature within safe limits.
   • Use thermal paste or thermal tape between the device and the heatsink to improve heat transfer.

3. Biasing:

   • Apply the gate-source voltage (V_GS) carefully to avoid exceeding the maximum ratings. The typical operating range is from 0V to 4V.
   • Ensure that the drain-source voltage (V_DS) does not exceed 20V to prevent damage to the device.

4. Current Handling:

   • The continuous drain current (I_D) should not exceed 40A at 25掳C or 27A at 75掳C. For pulse applications, ensure that the pulse duration and frequency do not exceed the specified limits.
   • For high current applications, consider using multiple devices in parallel to distribute the load.

5. Testing:

   • When testing the device, use a current-limited power supply to avoid accidental overcurrent conditions.
   • Measure the on-state resistance (R_DS(on)) at the specified gate-source voltage to verify proper operation.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • If the device has been stored for an extended period, perform a visual inspection and electrical tests before use.

7. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Use appropriate personal protective equipment (PPE) such as gloves and safety glasses.

(For reference only)