Details

---

BUY BTS441T https://www.utsource.net/itm/p/12607461.html

Parameter	Symbol	Min	Typ	Max	Unit	Condition
Continuous Drain Current	ID	-	200	-	A	Ta = 25掳C, VGS = 10V
Peak Drain Current	Ipeak	-	330	-	A	t = 10ms, VGS = 10V
Gate-Source Voltage	VGS	-20	-	20	V	-
Drain-Source Voltage	VDS	-	45	-	V	-
Power Dissipation	PD	-	110	-	W	Ta = 25掳C, 胃JA = 3.5 K/W
Junction Temperature	Tj	-	175	-	掳C	-
Storage Temperature	Tstg	-65	-	150	掳C	-

Instructions for Use

1. Mounting and Handling:

   • Ensure proper handling to avoid damage to the device.
   • Mount the device on a heatsink if operating at high power levels to maintain junction temperature within safe limits.

2. Electrical Connections:

   • Connect the drain (D) to the load.
   • Connect the source (S) to the ground.
   • Apply the gate (G) voltage relative to the source (S) to control the device.

3. Gate Drive:

   • Apply a gate-source voltage (VGS) of at least 10V to fully turn on the device.
   • Ensure the gate drive circuit can provide sufficient current to charge and discharge the gate capacitance quickly.

4. Thermal Management:

   • Monitor the junction temperature (Tj) to ensure it does not exceed 175掳C.
   • Use thermal paste between the device and the heatsink for better heat dissipation.

5. Overcurrent Protection:

   • Implement overcurrent protection to prevent damage from excessive drain current.
   • Consider using a current-limiting resistor or a fuse in series with the load.

6. Reverse Polarity Protection:

   • The device is designed to handle reverse polarity up to 20V. However, it is recommended to use additional protection circuits for robustness.

7. Storage and Operation:

   • Store the device in a dry, cool place within the storage temperature range (-65掳C to 150掳C).
   • Operate the device within the specified electrical and thermal parameters to ensure reliable performance.

(For reference only)