Details

---

BUY PCF7953PTTM1AC https://www.utsource.net/itm/p/12607469.html

Parameter	Description	Value/Range
Part Number	Component identifier	PCF7953PTTM1AC
Function	Type of device	Real-Time Clock (RTC) with I2C Interface
Package Type	Package style	SOIC-8
Operating Voltage	Supply voltage range	2.0V to 5.5V
Current Consumption	Active current	400nA (typical)
Temperature Range	Operating temperature	-40掳C to +85掳C
Oscillator Frequency	Internal oscillator frequency	32.768kHz
Communication Interface	Interface type for data communication	I2C
Backup Power Supply	Secondary power supply for maintaining time during main power loss	VBAT
Alarm Function	Alarm capability	Yes
Clock Accuracy	Precision of the timekeeping function	卤2ppm at 25掳C

Instructions:

1. Power Supply Connection: Connect the VCC pin to the main power supply within the specified operating voltage range (2.0V to 5.5V). Connect VBAT to a backup power source if required.
2. I2C Bus Configuration: Ensure the SDA and SCL pins are connected to the I2C bus lines with appropriate pull-up resistors as per system design requirements.
3. Initialization: Initialize the RTC by setting the correct time using the I2C interface upon first use or after a reset.
4. Setting Alarms: Configure alarm settings through the I2C commands provided in the datasheet to enable alert functions.
5. Reading Time and Date: Use the I2C interface to read the current time and date values from the RTC registers.
6. Maintaining Backup Power: Ensure that the backup power supply (VBAT) is stable to maintain accurate timekeeping during main power interruptions.
7. Handling External Oscillator: The device uses an internal 32.768kHz crystal oscillator; ensure proper handling and mounting to avoid damage or misalignment affecting accuracy.

(For reference only)