Details

---

BUY HCNR201 https://www.utsource.net/itm/p/12607474.html

Parameter	Symbol	Min	Typical	Max	Unit	Description
Forward Current	IF	-	20	50	mA	Maximum forward current through the LED
Reverse Voltage	VR	-	-	5	V	Maximum reverse voltage across the LED
Forward Voltage	VF	1.1	1.3	1.5	V	Forward voltage drop at IF = 20mA
Output Photocurrent	IOUT	0.5	1.0	1.5	渭A	Photocurrent output at IF = 20mA, RL = 10k惟
Dark Current	ID	-	0.01	0.1	渭A	Maximum dark current at VOUT = 5V
Isolation Voltage	VIORM	-	-	500	Vrms	Maximum isolation voltage between input and output
Operating Temperature	Toper	-40	-	85	掳C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	掳C	Storage temperature range
Rise Time	tr	-	10	20	渭s	Rise time from 10% to 90% of final value
Fall Time	tf	-	10	20	渭s	Fall time from 90% to 10% of final value

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified limits to avoid damaging the device.
   • Use a regulated power supply to maintain stable operation.

2. LED Forward Current:

   • The forward current (IF) should not exceed 50mA to prevent overheating and potential damage.
   • A current-limiting resistor is recommended to control the forward current.

3. Output Load:

   • Connect the load resistor (RL) appropriately to the output to ensure proper photocurrent conversion.
   • The load resistor should be chosen based on the desired output voltage and current requirements.

4. Isolation:

   • The HCNR201 provides electrical isolation between the input and output. Ensure that the isolation voltage (VIORM) is not exceeded to maintain safety and performance.

5. Temperature Considerations:

   • Operate the device within the specified temperature range (-40掳C to 85掳C) to ensure reliable performance.
   • Store the device in a dry environment within the storage temperature range (-65掳C to 150掳C).

6. Signal Timing:

   • Be aware of the rise and fall times when designing circuits that require fast signal transitions.
   • Use appropriate filtering or signal conditioning if necessary to meet timing requirements.

7. Handling:

   • Handle the device with care to avoid physical damage.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

By following these guidelines, you can ensure optimal performance and longevity of the HCNR201 optocoupler.

(For reference only)