Details

---

BUY MTY25N60E https://www.utsource.net/itm/p/12607476.html

Parameter	Symbol	Value	Unit
Maximum Drain-Source Voltage	VDSS	600	V
Maximum Gate-Source Voltage	VGS	卤20	V
Continuous Drain Current (Tc = 25掳C)	ID	25	A
Continuous Drain Current (Tc = 100掳C)	ID	18	A
Pulse Drain Current (Tc = 25掳C)	IDM	75	A
Power Dissipation (Tc = 25掳C)	PD	340	W
Power Dissipation (Tc = 100掳C)	PD	240	W
Junction Temperature Range	TJ	-55 to +150	掳C
Storage Temperature Range	TSTG	-55 to +150	掳C
Thermal Resistance, Junction to Case	R胃JC	0.8	掳C/W
Total Gate Charge	Qg	125	nC
Input Capacitance	Ciss	3200	pF
Output Capacitance	Coss	900	pF
Reverse Transfer Capacitance	Crss	550	pF

Instructions for Use:

1. Handling Precautions:

   • Handle the MTY25N60E with care to avoid damage to the leads and the die.
   • Use proper ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

2. Mounting:

   • Ensure that the mounting surface is flat and clean to ensure good thermal contact.
   • Apply a suitable thermal compound between the device and the heat sink to improve thermal conductivity.

3. Soldering:

   • Use a temperature-controlled soldering iron or wave soldering process.
   • Soldering temperature should not exceed 260掳C for more than 10 seconds.
   • Allow the device to cool naturally after soldering.

4. Operating Conditions:

   • Do not exceed the maximum ratings specified in the table.
   • Ensure that the junction temperature remains within the specified range to avoid thermal runaway.
   • Use appropriate heat sinks to manage power dissipation, especially under high current conditions.

5. Gate Drive:

   • The gate-source voltage (VGS) should be kept within the specified limits to avoid damaging the device.
   • Use a gate resistor to control the rate of rise of the gate voltage and reduce ringing.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Follow the recommended storage temperature range to prevent degradation.

7. Testing:

   • Use a suitable test setup to verify the device parameters before integrating it into the final application.
   • Perform functional tests at various operating conditions to ensure reliability.

8. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Ensure that the circuit is properly insulated and grounded to prevent electrical hazards.

(For reference only)