Details

---

BUY HA16107P. https://www.utsource.net/itm/p/12607481.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	4.5	5	5.5	V	Operating supply voltage
Output Current	Iout	-	100	200	mA	Maximum output current
Quiescent Current	Iq	0.5	1	2	mA	Current consumption in active state
Shutdown Current	Isd	0	0.1	1	渭A	Current consumption in shutdown mode
Operating Temperature	Topr	-40	-	85	掳C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	掳C	Storage temperature range
Thermal Resistance	Rth	-	120	-	掳C/W	Junction-to-ambient thermal resistance
Input Voltage Range	Vin	0	-	5.5	V	Range of input voltages
Output Voltage	Vout	0	3.3	5	V	Adjustable output voltage range
Ripple Rejection	RR	60	70	80	dB	Power supply rejection ratio at 100 kHz
Load Regulation	RL	0.1	0.5	1	%	Change in output voltage with load change
Line Regulation	RL	0.1	0.5	1	%	Change in output voltage with line change

Instructions for Use:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage to the device.

2. Output Current (Iout):

   • The maximum output current is 200mA. Do not exceed this limit to prevent overheating and potential failure.

3. Quiescent Current (Iq):

   • The quiescent current is typically around 1mA. This is the current consumed by the device when it is active but not driving any load.

4. Shutdown Current (Isd):

   • When the device is in shutdown mode, the current consumption drops to approximately 0.1渭A. Use the shutdown pin to control this mode.

5. Operating Temperature (Topr):

   • The device can operate within a temperature range of -40掳C to 85掳C. Avoid operating outside this range to ensure reliable performance.

6. Storage Temperature (Tstg):

   • Store the device in a temperature range of -65掳C to 150掳C to prevent damage during storage.

7. Thermal Resistance (Rth):

   • The thermal resistance from the junction to the ambient environment is typically 120掳C/W. Ensure proper heat dissipation to maintain safe operating temperatures.

8. Input Voltage Range (Vin):

   • The input voltage should be within 0V to 5.5V. Exceeding this range can cause damage to the device.

9. Output Voltage (Vout):

   • The output voltage can be adjusted between 0V and 5V. Use the appropriate external components to set the desired output voltage.

10. Ripple Rejection (RR):

    • The device provides a power supply rejection ratio (PSRR) of 60 to 80dB at 100kHz, effectively reducing ripple on the output.

11. Load Regulation (RL):

    • The load regulation is typically 0.1% to 1%, indicating the stability of the output voltage under varying load conditions.

12. Line Regulation (RL):

    • The line regulation is also typically 0.1% to 1%, indicating the stability of the output voltage under varying input voltage conditions.

Additional Notes:

• Always refer to the datasheet for detailed specifications and application notes.
• Use appropriate decoupling capacitors to stabilize the input and output voltages.
• Ensure proper PCB layout to minimize noise and improve performance.

(For reference only)