Details

---

BUY FX6KMJ-3 https://www.utsource.net/itm/p/12607482.html

Parameter	Description	Value
Model Number	Model identifier	FX6KMJ-3
Type	Relay Module	-
Input Voltage	Operating voltage range for the control circuit	3-32V DC
Output Voltage	Maximum switching voltage	250V AC
Current Rating	Maximum switching current	10A
Coil Resistance	Resistance of the relay coil	70惟
Contact Form	Configuration of relay contacts	SPDT
Operating Temperature	Temperature range for operation	-40掳C to 85掳C
Storage Temperature	Temperature range for storage	-40掳C to 85掳C
Insulation Resistance	Minimum insulation resistance between contacts	100M惟 at 500V DC
Dielectric Strength	Voltage withstand capability	2500V AC for 1 minute
Contact Material	Material used for relay contacts	Silver alloy
Dimensions	Physical size of the module	35mm x 15mm x 7mm
Weight	Weight of the module	10g

Instructions:

1. Power Supply: Connect the input voltage (3-32V DC) to the VCC and GND terminals of the relay module.
2. Control Signal: Apply a control signal to the IN terminal to switch the relay on or off. The control signal should be within the operating voltage range.
3. Load Connection: Connect the load to the NO (Normally Open) and COM (Common) terminals for normally open operation, or to the NC (Normally Closed) and COM terminals for normally closed operation.
4. Mounting: Secure the relay module to a suitable mounting surface using the provided mounting holes or adhesive tape.
5. Safety Precautions:
   • Ensure the relay is not operated beyond its rated voltage and current.
   • Avoid exposure to extreme temperatures and humidity.
   • Do not touch the relay contacts while the module is powered.
6. Testing:
   • Use a multimeter to verify the continuity of the contacts before and after applying the control signal.
   • Ensure the relay clicks when the control signal is applied, indicating proper operation.

(For reference only)