Details

---

BUY IRFS730 https://www.utsource.net/itm/p/12607485.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Drain-Source Voltage	VDS	-	-	-	200	V
Gate-Source Voltage	VGS	-	-15	-	+20	V
Continuous Drain Current (TC = 25掳C)	ID	-	-	-	4.9	A
Continuous Drain Current (TC = 100掳C)	ID	-	-	-	3.5	A
Pulse Drain Current (TC = 25掳C, tp = 10 ms, duty cycle = 1%)	IDpeak	-	-	-	14.7	A
Power Dissipation (TC = 25掳C)	PD	-	-	-	62	W
Junction Temperature	TJ	-	-	-	150	掳C
Storage Temperature Range	TSTG	-	-65	-	150	掳C
Total Device Dissipation (TA = 25掳C)	PTOT	-	-	-	62	W
RDS(on) at VGS = 10V	RDS(on)	ID = 4.9A	-	0.55	-	惟
Input Capacitance	Ciss	f = 1 MHz	-	1200	-	pF
Output Capacitance	Coss	f = 1 MHz	-	180	-	pF
Reverse Transfer Capacitance	Crss	f = 1 MHz	-	120	-	pF
Gate Charge	QG	VGS = 15V, IG = 0.5A	-	22	-	nC

Instructions for Use:

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid mechanical stress.
   • Mount the device on a heatsink if operating at high power levels to maintain junction temperature within safe limits.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Ensure that the gate-source voltage (V_GS) does not exceed the maximum ratings to prevent damage.

3. Thermal Management:

   • Monitor the junction temperature (T_J) to ensure it remains below 150掳C.
   • Use appropriate thermal management techniques such as heatsinks or forced air cooling for high-power applications.

4. Pulse Operation:

   • For pulse operation, ensure that the pulse duration and duty cycle do not exceed the specified limits to avoid overheating.

5. Storage:

   • Store the device in a dry environment within the storage temperature range (-65掳C to 150掳C).

6. Testing:

   • When testing the device, use the typical values provided as a reference for expected performance under standard conditions.

7. Safety:

   • Always follow safety guidelines when handling and operating high-voltage and high-current devices.
   • Use appropriate protective equipment and follow all relevant safety standards.

(For reference only)