Details

---

BUY G6B-2114P-US-5VDC https://www.utsource.net/itm/p/12607488.html

Parameter	Description	Value
Type	Relay	G6B-2114P-US-5VDC
Coil Voltage	Operating voltage for the coil	5 VDC
Coil Current	Current required to energize the coil	80 mA
Contact Form	Configuration of relay contacts	SPDT
Contact Rating	Maximum current and voltage the contacts can handle	5 A, 250 VAC
Insulation Resistance	Resistance between non-adjacent terminals	100 M惟 min at 500 VDC
Dielectric Strength	Voltage the insulation can withstand without breakdown	1500 VAC for 1 minute
Mechanical Life	Number of operations before mechanical failure	10 million operations
Electrical Life	Number of operations before electrical failure	100 thousand operations
Operating Temperature	Temperature range for reliable operation	-40掳C to +85掳C
Storage Temperature	Temperature range for storage	-40掳C to +85掳C
Weight	Weight of the component	7.5 g

Instructions:

1. Installation: Ensure that the relay is installed in a location where it will not be subjected to excessive vibration or shock. Mount the relay on a flat surface using appropriate mounting hardware.
2. Wiring: Connect the coil terminals to the specified control voltage (5 VDC). Wire the common, normally open, and normally closed contacts according to your circuit requirements.
3. Testing: Before operational use, test the relay under load conditions to ensure proper switching action.
4. Maintenance: This relay requires minimal maintenance. Periodically check connections for tightness and inspect for signs of wear or damage.
5. Handling Precautions: Avoid exposure to corrosive environments and handle with care to prevent damage to the sensitive components inside the relay.

(For reference only)