Details

---

BUY VN380SP. https://www.utsource.net/itm/p/12607524.html

Parameter	Description
Part Number	VN380SP
Type	N-Channel Enhancement Mode MOSFET
Package	TO-220AB
VDS (Max)	60V
VGS (Max)	卤20V
ID (Max)	15A (Tc = 25掳C)
RDS(on)	4.5 m惟 (VGS = 10V, ID = 15A)
Power Dissipation (Ptot)	115W (Tc = 25掳C)
Junction Temperature (TJ)	-55掳C to +175掳C
Storage Temperature (Tstg)	-65掳C to +150掳C
Gate Charge (Qg)	130 nC (VGS = 10V, VDS = 25V)
Input Capacitance (Ciss)	2240 pF (VDS = 25V, f = 1 MHz)
Output Capacitance (Coss)	640 pF (VDS = 25V, f = 1 MHz)
Reverse Transfer Capacitance (Crss)	550 pF (VDS = 25V, f = 1 MHz)

Instructions for Use

1. Handling and Storage:

   • Handle the VN380SP with care to avoid damage to the leads and body.
   • Store in a dry, cool place within the specified storage temperature range.

2. Mounting:

   • Ensure proper heat sinking to manage the power dissipation and maintain the junction temperature within safe limits.
   • Use a thermal compound between the MOSFET and the heatsink to improve thermal conductivity.

3. Electrical Connections:

   • Connect the Drain (D), Source (S), and Gate (G) terminals correctly.
   • Ensure that the gate voltage (VGS) does not exceed the maximum rating of 卤20V.
   • Use appropriate gate drive circuits to ensure fast switching and minimize switching losses.

4. Thermal Management:

   • Monitor the junction temperature (TJ) to ensure it remains within the operational range of -55掳C to +175掳C.
   • Consider derating the current if operating at higher temperatures to avoid exceeding the maximum power dissipation.

5. Protection:

   • Implement overvoltage and overcurrent protection circuits to safeguard the MOSFET from transient conditions.
   • Use TVS diodes or similar devices to protect against voltage spikes.

6. Testing:

   • Test the MOSFET in a controlled environment to verify its performance and ensure it meets the application requirements.
   • Perform initial tests at low power levels before increasing the load.

7. Compliance:

   • Ensure that the design and application comply with relevant safety and regulatory standards.

(For reference only)