Details

---

BUY MCT210 https://www.utsource.net/itm/p/12607526.html

Parameter	Description	Value
Part Number	Component Identifier	MCT210
Type	Phototransistor Optocoupler	-
Package	DIP-4	-
Isolation Voltage	Maximum isolation voltage between input and output	5000 Vrms
Input Current	Forward current through the LED	10 mA (max)
Forward Voltage	Voltage drop across the LED when forward biased	1.2 V (typ)
Output Current	Collector current of the phototransistor	50 mA (max)
Collector-Emitter Voltage	Maximum voltage that can be applied between collector and emitter	70 V (max)
Collector-Emitter Saturation Voltage	Voltage drop between collector and emitter when saturated	0.5 V (max)
Operating Temperature	Range of temperatures for reliable operation	-40掳C to 85掳C
Storage Temperature	Range of temperatures for storage	-65掳C to 150掳C
Rise Time	Time taken for the output to rise from 10% to 90% of its final value	3 渭s (max)
Fall Time	Time taken for the output to fall from 90% to 10% of its final value	3 渭s (max)
CMTI (Common Mode Transient Immunity)	Immunity to common mode transients	10 kV/渭s (min)

Instructions for Use

1. Handling Precautions:

   • Handle the MCT210 with care to avoid static discharge, which can damage the sensitive components.
   • Use proper ESD (Electrostatic Discharge) protection measures during handling and assembly.

2. Mounting:

   • Ensure the MCT210 is securely mounted on the PCB (Printed Circuit Board) to prevent mechanical stress.
   • Follow the recommended soldering profile to avoid thermal damage during soldering.

3. Connection:

   • Connect the anode and cathode of the LED (input side) to the control signal source.
   • Connect the collector and emitter of the phototransistor (output side) to the load circuit.
   • Ensure the correct polarity of the connections to avoid damage.

4. Operational Considerations:

   • The input current should not exceed 10 mA to prevent overheating and potential damage to the LED.
   • The output current should not exceed 50 mA to ensure reliable operation of the phototransistor.
   • Operate the device within the specified temperature range to maintain performance and reliability.

5. Testing:

   • Test the MCT210 in a controlled environment to verify its functionality before integrating it into the final application.
   • Use a multimeter to check the continuity and resistance values of the pins to ensure proper connection and functionality.

6. Storage:

   • Store the MCT210 in a dry, cool place away from direct sunlight and extreme temperatures.
   • Keep the components in their original packaging until ready for use to protect them from environmental factors.

By following these guidelines, you can ensure the reliable and efficient operation of the MCT210 optocoupler in your circuits.

(For reference only)