Details

---

BUY SFC2812EC https://www.utsource.net/itm/p/12607528.html

Parameter	Description	Value
Part Number	Component Identifier	SFC2812EC
Type	Device Type	Surface Mount Inductor
Package	Package Type	2812 (7.0 x 7.0 x 1.2 mm)
Inductance Range	Inductance Values	0.1 渭H to 47 渭H
Tolerance	Inductance Tolerance	卤5%
DC Resistance (DCR)	DC Resistance at 20掳C	0.005 惟 to 0.6 惟
Rated Current (Irms)	RMS Current at 20掳C	0.3 A to 4.5 A
Saturation Current (Isat)	Current at which inductance drops by 20%	0.5 A to 6.0 A
Operating Temperature	Operating Temperature Range	-55掳C to +125掳C
Storage Temperature	Storage Temperature Range	-55掳C to +150掳C
Frequency Range	Frequency Range	10 kHz to 100 MHz
Shielding	Magnetic Shielding	Fully Shielded
Termination	Termination Type	Solderable SnPb
RoHS Compliance	RoHS Compliance	Yes

Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

2. Soldering:

   • Preheat the board to 120掳C to 150掳C before soldering.
   • Use a soldering iron with a temperature of 260掳C to 300掳C.
   • Soldering time should not exceed 3 seconds per pad.
   • Allow the component to cool naturally after soldering.

3. Mounting:

   • Ensure the board is flat and stable during mounting.
   • Place the component on the board with the correct orientation.
   • Apply gentle pressure to ensure good contact between the component and the board.

4. Testing:

   • After soldering, visually inspect the joints for any defects.
   • Use a multimeter to check for continuity and resistance.
   • Test the inductance value using an LCR meter to ensure it meets the specified tolerance.

5. Environmental Considerations:

   • Avoid exposure to corrosive environments or high humidity.
   • If the component is exposed to harsh conditions, consider additional protective measures such as conformal coating.

6. Disposal:

   • Dispose of the component according to local environmental regulations.
   • Recycle if possible.

(For reference only)