Details

---

BUY NTP18N06G https://www.utsource.net/itm/p/12607531.html

Parameter	Symbol	Test Conditions	Min	Typical	Max	Unit
Drain-Source Voltage	VDS		-60		60	V
Gate-Source Voltage	VGS		-20		20	V
Continuous Drain Current	ID	VDS = 60V, TA = 25掳C	-	18	-	A
Pulse Drain Current	IDpeak	VDS = 60V, TC = 25掳C, tp = 10ms, Duty Cycle = 1%	-	36	-	A
Gate Charge	QG	VGS = 10V, ID = 18A	-	12	-	nC
Input Capacitance	Ciss	VDS = 0V, f = 1MHz	-	1200	-	pF
Output Capacitance	Coss	VDS = 60V, f = 1MHz	-	450	-	pF
Reverse Transfer Capacitance	Crss	VDS = 60V, VGS = 0V, f = 1MHz	-	250	-	pF
On-State Resistance	RDS(on)	VGS = 10V, ID = 18A	-	0.045	-	惟
Threshold Voltage	VGS(th)	ID = 250渭A	1.0	1.5	2.0	V
Power Dissipation	PD	TC = 25掳C	-	180	-	W
Junction Temperature	TJ		-55		150	掳C
Storage Temperature	TSTG		-55		150	掳C

Instructions for Use:

1. Handling and Storage:

   • Store the NTP18N06G in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid static discharge, which can damage the device.

2. Mounting:

   • Ensure proper heat sinking to manage thermal dissipation, especially under high current conditions.
   • Follow recommended PCB layout guidelines to minimize parasitic inductances and capacitances.

3. Biasing:

   • Apply the gate-source voltage (V_GS) within the specified range to avoid damaging the gate oxide.
   • Use appropriate gate drive circuits to ensure fast switching and reduce switching losses.

4. Operation:

   • Operate within the maximum ratings for drain-source voltage (V_DS), gate-source voltage (V_GS), and drain current (I_D).
   • Monitor the junction temperature (T_J) to ensure it does not exceed the maximum rating to prevent thermal runaway.

5. Testing:

   • Use a suitable test setup to measure parameters such as on-state resistance (R_DS(on)) and threshold voltage (V_GS(th)).
   • Ensure that all test conditions match the specified test conditions to obtain accurate results.

6. Safety:

   • Always follow safety guidelines when handling high voltages and currents.
   • Use protective equipment and ensure proper grounding to prevent electrical shock.

(For reference only)