Details

---

BUY 2SC3264 https://www.utsource.net/itm/p/12607533.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCE	-	-	80	V
Base-Emitter Voltage	VBE	-	-	7	V
Collector Current	IC	-	-	1500	mA
Base Current	IB	-	-	150	mA
Power Dissipation	PT	-	-	125	W
Operating Temperature	TOP	-55	-	150	掳C
Storage Temperature	TSTG	-65	-	200	掳C
Transition Frequency	fT	-	300	-	MHz
DC Current Gain	hFE	20	100	600	-

Instructions for Use:

1. Handling:

   • Handle the 2SC3264 with care to avoid damage to the leads or the body.
   • Use appropriate ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

2. Mounting:

   • Ensure proper alignment of the leads during soldering.
   • Avoid excessive heat during soldering, as high temperatures can damage the transistor.
   • Use a heat sink if operating at high power levels to manage heat dissipation.

3. Biasing:

   • Ensure that the base-emitter voltage (V_BE) does not exceed the maximum rating.
   • The collector current (I_C) should be kept within the specified limits to avoid overheating and potential failure.

4. Operation:

   • Operate the transistor within the specified temperature range to ensure reliable performance.
   • Monitor the power dissipation (P_T) to prevent thermal runaway.

5. Testing:

   • Use a multimeter or transistor tester to verify the functionality of the 2SC3264 before installation.
   • Check for proper biasing and operation under load conditions.

6. Storage:

   • Store the 2SC3264 in a dry, cool place to prevent moisture damage.
   • Keep the components in anti-static packaging to protect against ESD.

By following these guidelines, you can ensure optimal performance and longevity of the 2SC3264 transistor.

(For reference only)