Details

---

BUY A5P-202U https://www.utsource.net/itm/p/12607539.html

Parameter	Description	Value
Part Number	Component Identifier	A5P-202U
Type	Component Type	Phototransistor
Package	Physical Package	SMD (Surface Mount Device)
Emission Wavelength	Light Emission Wavelength	940 nm (Infrared)
Forward Current (IF)	Maximum Forward Current	100 mA
Reverse Voltage (VR)	Maximum Reverse Voltage	5 V
Collector-Emitter Voltage (VCE)	Maximum Collector-Emitter Voltage	30 V
Collector Current (IC)	Maximum Collector Current	50 mA
Sensitivity	Current Transfer Ratio (CTR)	100% to 600%
Rise Time (tr)	Time for Output to Rise from 10% to 90%	1 渭s
Fall Time (tf)	Time for Output to Fall from 90% to 10%	1 渭s
Operating Temperature Range	Ambient Operating Temperature	-40掳C to +85掳C
Storage Temperature Range	Storage Temperature	-40掳C to +125掳C
Lead Soldering Temperature	Maximum Lead Soldering Temperature	260掳C (10 seconds)

Instructions for Use:

1. Handling and Storage:

   • Store the A5P-202U in a dry, cool place away from direct sunlight.
   • Handle with care to avoid static discharge, which can damage the component.

2. Mounting:

   • Ensure the soldering iron is clean and well-tinned before soldering.
   • Solder the leads within 10 seconds at a maximum temperature of 260掳C to avoid thermal damage.
   • Allow the component to cool naturally after soldering.

3. Electrical Connections:

   • Connect the forward current (IF) to the appropriate voltage source, ensuring it does not exceed 100 mA.
   • Ensure the reverse voltage (VR) does not exceed 5 V to prevent damage.
   • The collector-emitter voltage (VCE) should not exceed 30 V.

4. Operational Considerations:

   • The sensitivity of the A5P-202U can vary between 100% and 600%, so adjust the circuit design accordingly.
   • The rise and fall times are both 1 渭s, making it suitable for high-speed applications.

5. Environmental Conditions:

   • Operate the component within the specified temperature range (-40掳C to +85掳C) to ensure reliable performance.
   • Store the component within the storage temperature range (-40掳C to +125掳C).

6. Testing:

   • Test the component using a multimeter or an appropriate test circuit to verify its functionality.
   • Check for continuity and correct voltage levels to ensure proper operation.

(For reference only)