Details

---

BUY BD679G https://www.utsource.net/itm/p/12607543.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Collector-Emitter Voltage	VCE	-	80	-	V
Emitter-Collector Voltage	VEC	-	80	-	V
Base-Emitter Voltage	VBE	-	2.5	-	V	IC = 1A, TA = 25掳C
Collector Current	IC	-	15	-	A
Base Current	IB	-	1.5	-	A	IC = 15A, TA = 25掳C
Power Dissipation	PT	-	130	-	W	TC = 25掳C
Storage Temperature	TSTG	-40	-	150	掳C
Operating Temperature	TA	-40	-	150	掳C
Thermal Resistance	R胃JC	-	1.4	-	掳C/W	Junction to Case
Transition Frequency	fT	-	2.5	-	MHz	IC = 1A, VCE = 10V

Instructions for Use:

1. Mounting and Handling:

   • Handle the BD679G with care to avoid mechanical damage.
   • Ensure proper heat sinking if operating near maximum power dissipation.

2. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) terminals correctly.
   • Use appropriate wire gauges to handle the current ratings.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table.
   • Ensure that the operating temperature is within the specified range.

4. Thermal Management:

   • Use a heatsink if the power dissipation exceeds the self-heating limits.
   • Calculate the thermal resistance to ensure the junction temperature remains within safe limits.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and corrosive environments.

6. Testing:

   • Test the device under controlled conditions to verify its performance before integrating it into a circuit.

7. Safety:

   • Follow all safety guidelines when handling high-power devices.
   • Use appropriate protective equipment and grounding to prevent electrical hazards.

(For reference only)