Details

---

BUY 2SC3964 https://www.utsource.net/itm/p/12607547.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	80	V
Collector-Base Voltage	VCBO	-	-	100	V
Emitter-Base Voltage	VEBO	-	-	5	V
Collector Current	IC	-	-	3	A
Base Current	IB	-	-	0.3	A
Power Dissipation	PT	-	-	65	W
Operating Junction Temperature	TJ	-40	-	150	掳C
Storage Temperature	TSTG	-55	-	150	掳C
Transition Frequency	fT	-	200	-	MHz
DC Current Gain	hFE	20	100	400	-

Instructions for Use:

1. Mounting and Handling:

   • Handle the 2SC3964 with care to avoid damage to the leads and body.
   • Ensure proper heat sinking when operating at high power levels to prevent overheating.

2. Electrical Connections:

   • Connect the collector (C) to the positive supply voltage.
   • Connect the emitter (E) to ground or the load.
   • Connect the base (B) to the control circuitry.

3. Biasing:

   • Use appropriate biasing circuits to ensure stable operation.
   • The base-emitter voltage (V_BE) should be kept within the specified limits to avoid damage.

4. Thermal Management:

   • Ensure adequate cooling, especially when operating near the maximum power dissipation (P_T).
   • Use a heatsink if necessary to maintain the junction temperature (T_J) within safe limits.

5. Storage and Operation:

   • Store the device in a dry, cool place away from direct sunlight.
   • Operate the device within the specified temperature ranges to ensure reliable performance.

6. Testing:

   • Use a multimeter or transistor tester to verify the functionality of the 2SC3964 before installation.
   • Check for short circuits and open circuits between the pins.

7. Safety Precautions:

   • Avoid exceeding the maximum ratings to prevent damage to the device.
   • Use appropriate protective equipment when handling high-voltage circuits.

(For reference only)