Details

---

BUY V23086-R1805-A502 https://www.utsource.net/itm/p/12607553.html

Parameter	Value	Unit
Part Number	V23086-R1805-A502	-
Type	Resistor	-
Resistance	1.805	k惟
Tolerance	卤1%	%
Power Rating	0.125	W
Temperature Coefficient	卤100	ppm/掳C
Operating Temperature	-55 to +125	掳C
Package	0603	-
Material	Thick Film	-
Operating Voltage	50	V
Soldering Temperature	260	掳C

Instructions:

1. Handling:

   • Handle with care to avoid damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions.

2. Mounting:

   • Place the resistor on the PCB (Printed Circuit Board) according to the design layout.
   • Ensure the resistor is aligned correctly with the pads.
   • Apply solder paste to the pads if using reflow soldering.

3. Soldering:

   • For manual soldering, use a temperature-controlled soldering iron set to 350掳C (662掳F).
   • For reflow soldering, follow the recommended profile:
     • Preheat: 120-150掳C for 60-90 seconds.
     • Soak: 150-180掳C for 60-90 seconds.
     • Reflow: 230-250掳C for 10-20 seconds.
     • Cooling: Natural cooling to room temperature.

4. Inspection:

   • Visually inspect the solder joints for proper wetting and no bridges or voids.
   • Use a multimeter to verify the resistance value.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Use within the recommended shelf life to ensure optimal performance.

6. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle where possible.

(For reference only)