Details

---

BUY S2000AFI https://www.utsource.net/itm/p/12607557.html

Parameter	Description
Part Number	S2000AFI
Type	Optical Isolator
Input Current (IF)	10 mA (Typical)
Output Current (IC)	5 mA (Maximum)
Isolation Voltage	2500 Vrms (Minimum)
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-55掳C to +125掳C
Package Type	DIP-4 (Dual In-Line Package)
Lead Pitch	2.54 mm (0.100 inch)
Dimensions	7.62 mm x 7.62 mm x 4.32 mm (0.300 inch x 0.300 inch x 0.170 inch)
Lead Free	Yes
RoHS Compliant	Yes

Instructions for Use

1. Mounting:

   • Ensure the PCB has sufficient clearance to accommodate the height of the S2000AFI.
   • Use a soldering iron with a temperature setting appropriate for lead-free solder (typically 350掳C to 400掳C).
   • Apply a small amount of flux to the PCB pads before soldering.
   • Solder each lead individually, ensuring that the leads are securely attached to the PCB.

2. Electrical Connections:

   • Connect the input side (pins 1 and 2) to the control circuit.
   • Connect the output side (pins 3 and 4) to the load or receiving circuit.
   • Ensure that the input and output circuits are electrically isolated from each other to maintain the isolation barrier.

3. Operating Conditions:

   • Operate the device within the specified temperature range to ensure reliable performance.
   • Do not exceed the maximum ratings for input current, output current, and isolation voltage.
   • Avoid subjecting the device to mechanical stress, such as bending or twisting the leads.

4. Storage:

   • Store the device in a dry, cool place away from direct sunlight and corrosive substances.
   • Handle the device with care to prevent damage to the leads and package.

5. Testing:

   • Before installing the device in a final application, test it using a known good circuit to verify proper operation.
   • Use a multimeter to check for continuity and isolation between the input and output sides.

6. Disposal:

   • Dispose of the device in accordance with local environmental regulations.
   • Do not incinerate the device, as it may release harmful substances.

(For reference only)