Details

---

BUY BTS132. https://www.utsource.net/itm/p/12607569.html

Parameter	Symbol	Min	Typical	Max	Unit	Condition
Continuous Current	IC	-	1.5	3.0	A	Ta = 25掳C
Peak Current	ICM	-	4.0	6.0	A	t = 10ms, Ta = 25掳C
On-State Voltage	VON	0.3	0.5	0.7	V	IC = 1A, Ta = 25掳C
Off-State Leakage	IOS	-	1.0	5.0	渭A	VGS = 0V, VDS = 18V, Ta = 25掳C
Gate Threshold Voltage	VTG	1.5	2.0	3.0	V	IC = 100渭A, Ta = 25掳C
Gate Charge	QG	-	10	20	nC	IC = 1A, Ta = 25掳C
Thermal Resistance	R胃JA	-	50	100	K/W	-
Operating Temperature	Toper	-40	-	125	掳C	-
Storage Temperature	Tstg	-40	-	150	掳C	-

Instructions for Use:

1. Mounting and Handling:

   • Handle the BTS132 with care to avoid mechanical damage.
   • Ensure proper heat sinking if operating at high currents to manage thermal resistance.

2. Electrical Connections:

   • Connect the Drain (D) to the load.
   • Connect the Source (S) to the common ground.
   • Apply the control signal to the Gate (G).

3. Powering the Device:

   • Ensure the supply voltage is within the specified range to avoid damage.
   • Use appropriate decoupling capacitors near the power supply pins to reduce noise and improve stability.

4. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed the maximum operating temperature.
   • Use a heatsink or cooling solution if necessary, especially for continuous high current applications.

5. Protection Circuits:

   • Implement overcurrent protection to prevent damage from excessive current.
   • Consider using a flyback diode if driving inductive loads to protect against voltage spikes.

6. Testing and Verification:

   • Test the device under controlled conditions before deploying it in a final application.
   • Verify all connections and parameters to ensure the device operates as expected.

7. Storage:

   • Store the BTS132 in a dry, cool place away from direct sunlight and sources of heat.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage during storage and handling.

(For reference only)