Details

---

BUY GBPC3506W https://www.utsource.net/itm/p/12607573.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.7	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	-	3.3	-	V	Fixed output voltage
Output Current	IOUT	-	500	600	mA	Continuous output current
Quiescent Current	IQ	-	2.5	4.0	渭A	Quiescent current at no load
Dropout Voltage	VDROP	-	300	500	mV	Typical dropout voltage
Efficiency	畏	-	90	-	%	Typical efficiency at full load
Operating Temperature	TOP	-40	-	125	掳C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range
Junction Temperature	TJ	-	-	150	掳C	Maximum junction temperature

Instructions for Use:

1. Input Connection: Connect the input voltage (V_IN) to the VIN pin. Ensure the input voltage is within the specified range of 2.7V to 5.5V.
2. Output Connection: Connect the output voltage (V_OUT) to the VOUT pin. The fixed output voltage is 3.3V.
3. Ground Connection: Ensure a common ground connection between the input and output circuits.
4. Capacitors:
   • Place a 1渭F ceramic capacitor close to the VIN pin to stabilize the input voltage.
   • Place a 1渭F ceramic capacitor close to the VOUT pin to stabilize the output voltage.
5. Thermal Considerations: The device has a maximum junction temperature of 150掳C. Ensure adequate heat dissipation, especially under high load conditions.
6. Efficiency: The typical efficiency is 90% at full load. Monitor the power consumption to ensure optimal performance.
7. Operating and Storage Temperature: The device operates within a temperature range of -40掳C to 125掳C and can be stored between -65掳C and 150掳C.
8. Quiescent Current: The quiescent current is very low, typically 2.5渭A, making it suitable for battery-powered applications.
9. Dropout Voltage: The typical dropout voltage is 300mV, allowing the regulator to maintain regulation even when the input voltage is close to the output voltage.

Additional Notes:

• PCB Layout: Ensure proper PCB layout with short traces and good grounding to minimize noise and improve stability.
• Overcurrent Protection: The device includes overcurrent protection to prevent damage under fault conditions.
• Short-Circuit Protection: The device also includes short-circuit protection to safeguard against output shorts.

(For reference only)