Details

---

BUY V23092-A1024-A802 https://www.utsource.net/itm/p/12607583.html

Parameter	Value	Unit
Part Number	V23092-A1024-A802	-
Type	Voltage Regulator	-
Input Voltage Range	4.5 to 28	V
Output Voltage	5	V
Output Current	250	mA
Dropout Voltage	1.2	V
Quiescent Current	5	渭A
Operating Temperature	-40 to 125	掳C
Package	TO-252 (DPAK)	-
Mounting Type	Surface Mount	-

Instructions:

1. Power Supply Connection:

   • Connect the input voltage to the "VIN" pin.
   • Connect the output voltage to the "VOUT" pin.
   • Ground both the input and output circuits to the "GND" pin.

2. Capacitor Requirements:

   • Place a 1 渭F ceramic capacitor between VIN and GND as close to the regulator as possible.
   • Place a 1 渭F ceramic capacitor between VOUT and GND to stabilize the output.

3. Thermal Management:

   • Ensure adequate heat dissipation, especially when operating at high input voltages or high output currents.
   • Use a heatsink if necessary to keep the junction temperature within the specified range.

4. PCB Layout:

   • Keep the traces from VIN to the regulator and from the regulator to VOUT short to minimize noise and improve stability.
   • Use wide traces for ground connections to reduce resistance and improve thermal performance.

5. Storage and Handling:

   • Store in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid static discharge, which can damage the component.

6. Testing:

   • Before final assembly, test the regulator with a known load to ensure it meets the required specifications.
   • Use a multimeter to verify the output voltage and current.

7. Compliance:

   • Ensure that the design complies with relevant safety and regulatory standards, such as UL, CE, and RoHS.

(For reference only)