Details

---

BUY VT82C416 https://www.utsource.net/itm/p/12607589.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating supply voltage	4.75	-	5.25	V
Operating Temperature (Toper)	Temperature range for normal operation	-40	-	85	掳C
Storage Temperature (Tstg)	Temperature range for storage	-65	-	150	掳C
I/O Voltage (VIO)	Input/output voltage range	3.3	-	5.0	V
Maximum Output Current (IOL)	Maximum output current (low level)	-	24	-	mA
Maximum Output Current (IOH)	Maximum output current (high level)	-	-12	-	mA
Power Consumption (Pd)	Maximum power dissipation	-	-	1.0	W
Standby Current (ISB)	Standby current	-	5	-	mA
Active Current (IACT)	Active current	-	100	-	mA

Instructions for Using VT82C416

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 4.75V to 5.25V.
   • The I/O voltage (VIO) should be between 3.3V and 5.0V.

2. Temperature Considerations:

   • The operating temperature range is from -40掳C to 85掳C.
   • For storage, the temperature range should be between -65掳C and 150掳C.

3. Current Handling:

   • The maximum output current for low-level outputs (IOL) is 24mA.
   • The maximum output current for high-level outputs (IOH) is -12mA.

4. Power Consumption:

   • The maximum power dissipation (Pd) is 1.0W. Ensure adequate heat dissipation if operating near this limit.

5. Current Consumption:

   • In standby mode, the current consumption (ISB) is typically 5mA.
   • In active mode, the current consumption (IACT) is typically 100mA.

6. Installation and Handling:

   • Handle the VT82C416 with care to avoid static damage.
   • Follow proper soldering techniques to ensure reliable connections.

7. Testing and Troubleshooting:

   • Use a multimeter to verify the supply voltage and I/O voltages.
   • Check the current consumption to ensure it is within the expected ranges.
   • If the device does not function as expected, check the power supply, connections, and temperature conditions.

8. Application Notes:

   • Refer to the datasheet for detailed application notes and circuit diagrams.
   • Ensure all necessary decoupling capacitors are installed close to the power pins to maintain stability.

By following these guidelines, you can ensure optimal performance and reliability of the VT82C416 in your application.

(For reference only)