Details

---

BUY DK510A https://www.utsource.net/itm/p/12607593.html

Parameter	Description	Value
Model Number	Component Model	DK510A
Type	Component Type	RF Switch
Frequency Range	Operating Frequency	10 MHz to 6 GHz
Insertion Loss	Signal Loss	≤ 0.8 dB (Typical)
Isolation	Signal Isolation	≥ 40 dB (Typical)
VSWR	Voltage Standing Wave Ratio	≤ 1.3:1 (Typical)
Power Handling	Continuous Wave Power	2 W (Typical)
Supply Voltage	Operating Voltage	3.3 V to 5 V DC
Control Voltage	Logic Levels	0 V (Low), 3.3 V to 5 V (High)
Operating Temperature	Ambient Temperature	-40°C to +85°C
Storage Temperature	Storage Conditions	-55°C to +125°C
Package	Housing Type	SMT (Surface Mount Technology)
Dimensions	Physical Size	5 x 5 x 1 mm

Instructions for Use:

1. Power Supply: Connect the supply voltage (3.3 V to 5 V DC) to the Vcc pin and ground to the GND pin.
2. Control Signals: Apply the control voltage (0 V for Low, 3.3 V to 5 V for High) to the control pins to switch between states.
3. Signal Path: Connect the input signal to the RF1 or RF2 port and the output signal to the RF3 port.
4. Heat Management: Ensure proper heat dissipation if operating at high power levels or in high ambient temperatures.
5. Handling: Handle with care to avoid damage to the SMT package. Use appropriate ESD protection measures.
6. Testing: Before integrating into a system, test the component under specified conditions to ensure it meets performance requirements.
7. Storage: Store in a dry, cool environment to prevent damage from moisture or extreme temperatures.

(For reference only)