Details

---

BUY 2SC3306 https://www.utsource.net/itm/p/12607606.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCE	-	-	45	V
Base-Emitter Voltage	VBE	-	-	6	V
Collector Current	IC	-	-	100	mA
Base Current	IB	-	-	10	mA
Power Dissipation	PT	-	-	350	mW
Junction Temperature	TJ	-	-	150	掳C
Storage Temperature	TSTG	-55	-	150	掳C

Instructions for Use:

1. Handling Precautions:

   • Handle the 2SC3306 with care to avoid damage to the leads and the junction.
   • Use proper ESD (Electrostatic Discharge) protection when handling the device.

2. Mounting:

   • Ensure that the leads are not bent excessively close to the body of the transistor.
   • Soldering should be done quickly to avoid overheating the junction. The maximum soldering temperature is 300掳C for 10 seconds.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table.
   • Ensure that the junction temperature does not exceed 150掳C.
   • Use a heat sink if necessary to maintain the junction temperature within safe limits.

4. Storage:

   • Store the 2SC3306 in a dry, cool place away from direct sunlight.
   • Avoid exposure to corrosive gases and environments.

5. Testing:

   • When testing the 2SC3306, use appropriate test equipment and ensure that the test conditions do not exceed the maximum ratings.
   • Test the device in a controlled environment to avoid damage.

6. Applications:

   • The 2SC3306 is suitable for general-purpose amplification and switching applications.
   • It can be used in audio amplifiers, power supplies, and other low-power circuits.

(For reference only)