Details

---

BUY LC9600P-M144 https://www.utsource.net/itm/p/12607613.html

Parameter	Description
Part Number	LC9600P-M144
Type	LCD Controller
Interface	SPI, I2C
Display Size	3.5 inch
Resolution	320 x 240 pixels
Color Depth	65K colors
Operating Voltage	3.3V
Operating Temp.	-20掳C to +70掳C
Storage Temp.	-30掳C to +80掳C
Package Type	LQFP-144

Instructions for Use

1. Power Supply Setup

   • Ensure the power supply voltage is set to 3.3V.
   • Connect the power supply to the VCC and GND pins.

2. Interface Configuration

   • Select the desired interface (SPI or I2C) by setting the appropriate configuration bits in the control register.
   • For SPI, connect the MOSI, MISO, SCLK, and CS pins.
   • For I2C, connect the SDA and SCL pins.

3. Initialization Sequence

   • Power on the device.
   • Send the initialization commands as specified in the datasheet to configure display parameters such as brightness, contrast, and orientation.

4. Data Transmission

   • Transmit data to the display using the selected interface protocol.
   • Ensure that all data transmissions comply with the timing diagrams provided in the datasheet.

5. Shutdown/Standby Mode

   • To enter standby mode, send the standby command.
   • To power down the device, disconnect the power supply after sending a shutdown command if supported.

6. Handling Precautions

   • Avoid exposing the module to temperatures outside the operating and storage temperature ranges.
   • Handle the module with care to avoid damage to the pins and the LCD screen.

(For reference only)