Details

---

BUY TDA8920cth https://www.utsource.net/itm/p/12607630.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	4.5	5	5.5	V
Quiescent Current	IQ	Ta = 25掳C	-	30	-	mA
Output Power	Pout	RL = 8惟, THD = 10%	-	2.5	-	W
Total Harmonic Distortion	THD	Pout = 1W, RL = 8惟	-	0.1	-	%
Signal-to-Noise Ratio	SNR	A-weighted	-	95	-	dB
Input Sensitivity	Vi	Pout = 1W	-	200	-	mV
Input Impedance	Zin		-	47	-	k惟

Instructions for TDA8920cth:

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) to the appropriate pins of the TDA8920cth. Ensure the voltage is within the range of 4.5V to 5.5V.

2. Grounding:

   • Ensure a proper ground connection to avoid noise and interference.

3. Input Signal:

   • Apply the audio input signal to the designated input pin. The typical input sensitivity is 200mV for 1W output power.

4. Output Configuration:

   • Connect the speaker or load to the output terminals. For optimal performance, use a load impedance of 8惟.

5. Thermal Considerations:

   • Provide adequate heat dissipation as the device can get hot during operation. Use a heatsink if necessary.

6. Operating Temperature:

   • Ensure the ambient temperature (Ta) remains around 25掳C for best performance. Avoid extreme temperatures.

7. Installation:

   • Follow standard precautions for handling electronic components to prevent damage from electrostatic discharge (ESD).

8. Testing:

   • After installation, test the device with a known good signal source to ensure it is functioning correctly. Adjust the input level if needed to achieve the desired output power without excessive distortion.

(For reference only)