Details

---

BUY UPC811G2 https://www.utsource.net/itm/p/12607632.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	4.5	-	5.5	V
Quiescent Current	Iq	-	30	-	渭A
Output Voltage (High)	Vo(H)	4.2	-	5.0	V
Output Voltage (Low)	Vo(L)	0	-	0.4	V
Input Voltage Range	Vin	0	-	5.5	V
Input Leakage Current	Iin	-	1	-	渭A
Output Current (Sink)	Isink	-	10	-	mA
Output Current (Source)	Isource	-	10	-	mA
Propagation Delay Time	tpd	-	10	-	ns

Instructions for Using UPC811G2

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V.
   • Connect the Vcc pin to the positive power supply and GND to the ground.

2. Input Connections:

   • Connect the input signal to the IN pin.
   • The input voltage should be within the range of 0V to 5.5V.
   • Ensure the input leakage current does not exceed 1 渭A.

3. Output Connections:

   • Connect the load to the OUT pin.
   • The output can sink or source up to 10 mA of current.
   • The output voltage when high (Vo(H)) will be between 4.2V and 5.0V.
   • The output voltage when low (Vo(L)) will be between 0V and 0.4V.

4. Propagation Delay:

   • The propagation delay time (tpd) is typically 10 ns.
   • Ensure that the timing requirements of your circuit are compatible with this delay.

5. Quiescent Current:

   • The quiescent current (Iq) is typically 30 渭A.
   • This value should be considered in power budget calculations.

6. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Use appropriate ESD protection measures during handling and assembly.

7. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Follow recommended storage conditions as specified in the datasheet.

(For reference only)