Details

---

BUY M51995FP https://www.utsource.net/itm/p/12607633.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	4.75	5.0	5.25	V	Operating voltage range
Output Current (Per Channel)	IO	-	200	-	mA	Maximum output current per channel
Number of Channels	N	-	16	-	-	Number of output channels
Operating Temperature	TOPR	-40	-	85	掳C	Operating temperature range
Storage Temperature	TSTG	-55	-	150	掳C	Storage temperature range
Input Voltage Range	VIN	0	-	5.5	V	Input voltage range
Leakage Current	ILK	-	1	-	渭A	Leakage current per channel
Power Dissipation	PD	-	1000	-	mW	Maximum power dissipation
Rise Time	tr	-	50	-	ns	Rise time (typical)
Fall Time	tf	-	50	-	ns	Fall time (typical)
Propagation Delay	tPD	-	100	-	ns	Propagation delay (typical)
Enable Input Low Level	VIL	0	0.8	-	V	Enable input low level
Enable Input High Level	VIH	-	2.0	5.5	V	Enable input high level

Instructions for Using M51995FP

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 4.75V to 5.25V.
   • Connect the VCC pin to a stable power source.

2. Output Configuration:

   • The M51995FP has 16 output channels, each capable of sourcing up to 200mA of current.
   • Connect the load to the appropriate output pins and ensure the total current does not exceed the maximum rating.

3. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C for reliable performance.
   • Store the device in an environment with temperatures between -55掳C and 150掳C.

4. Input Voltage:

   • Apply input signals within the range of 0V to 5.5V to avoid damage to the device.
   • Use the enable input (EN) to control the operation of the device. Set the enable input to a high level (2.0V to 5.5V) to activate the outputs, and to a low level (0V to 0.8V) to disable them.

5. Leakage Current:

   • Each output channel may have a leakage current of up to 1渭A. Account for this when designing your circuit to ensure accurate current measurements.

6. Power Dissipation:

   • The device can dissipate up to 1000mW of power. Ensure proper heat dissipation to prevent overheating, especially when operating at high currents or in high ambient temperatures.

7. Timing Parameters:

   • The rise time (tr) and fall time (tf) are typically 50ns, and the propagation delay (tPD) is typically 100ns. These parameters should be considered when designing timing-critical applications.

8. Handling and Storage:

   • Handle the device with care to avoid static damage. Use proper ESD protection when handling the device.
   • Store the device in a dry, cool place to prevent moisture damage.

By following these guidelines, you can ensure optimal performance and reliability of the M51995FP in your application.

(For reference only)