Details

---

BUY 2SD2401 https://www.utsource.net/itm/p/12607637.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage (Reverse)	VCEO	-	-	60	V
Emitter-Base Voltage (Reverse)	VEBO	-	-	5	V
Collector-Base Voltage (Reverse)	VCBO	-	-	70	V
Continuous Collector Current	IC	-	-	3	A
Continuous Base Current	IB	-	-	0.3	A
Power Dissipation	PT	-	-	65	W
Junction Temperature	TJ	-20	-	150	掳C
Storage Temperature Range	TSTG	-55	-	150	掳C

Instructions for Use:

1. Mounting and Handling:

   • Handle the 2SD2401 with care to avoid mechanical stress.
   • Ensure proper heat sinking to manage the power dissipation, especially when operating near the maximum power rating.

2. Electrical Connections:

   • Connect the collector to the positive supply or load, the emitter to ground or the other end of the load, and the base to the control circuit.
   • Use appropriate wire gauges to handle the current ratings without excessive resistance.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table to prevent damage to the device.
   • Operate within the specified temperature range to ensure reliable performance.

4. Thermal Management:

   • Ensure adequate cooling to keep the junction temperature within safe limits.
   • Consider using a heatsink if the device will be operated at high power levels.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and extreme temperatures.
   • Avoid exposure to corrosive environments.

6. Testing:

   • Use a multimeter or transistor tester to verify the functionality of the 2SD2401 before installation.
   • Test the device under controlled conditions to ensure it meets the required specifications.

7. Safety Precautions:

   • Always disconnect the power supply before making any connections or changes to the circuit.
   • Use appropriate personal protective equipment (PPE) when handling high-power components.

(For reference only)