Details

---

BUY JQX-15F 012-1H62 https://www.utsource.net/itm/p/12607643.html

Parameter	Value
Part Number	JQX-15F 012-1H62
Type	Relay
Contact Form	SPDT (Single Pole Double Throw)
Rated Voltage	24VDC
Rated Current	10A
Coil Voltage	12VDC
**Coil Power Consumption	1.2W
Insulation Resistance	>100M惟
Dielectric Strength	1000VAC for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Mechanical Life	10,000,000 cycles
Electrical Life	100,000 cycles (resistive load)
Contact Resistance	<50m惟
Terminal Type	Quick Connect
Dimensions	30mm x 20mm x 20mm
Weight	15g

Instructions:

1. Installation:

   • Ensure the relay is installed in a well-ventilated area.
   • Use the quick connect terminals to securely connect the relay to your circuit.
   • Verify that the coil voltage matches the specified operating voltage.

2. Operation:

   • Apply the rated coil voltage to activate the relay.
   • The common (C) terminal will switch between the normally open (NO) and normally closed (NC) terminals based on the relay state.
   • Ensure the load current does not exceed the rated current of 10A.

3. Maintenance:

   • Periodically inspect the relay for signs of wear or damage.
   • Clean the contacts with a soft, dry cloth if necessary.
   • Do not use abrasive materials or solvents that could damage the relay.

4. Safety:

   • Always disconnect power before performing any maintenance or installation.
   • Avoid exposing the relay to excessive moisture, dust, or corrosive environments.
   • Ensure proper grounding to prevent electrical hazards.

5. Storage:

   • Store the relay in a dry, cool place away from direct sunlight and extreme temperatures.
   • Keep the relay in its original packaging to protect it from physical damage.

(For reference only)