Details

---

BUY HD14007UBP https://www.utsource.net/itm/p/12607646.html

Parameter	Description	Value
Part Number	Component Identifier	HD14007UBP
Function	Logic Function	3-Input NAND Gate
Supply Voltage (Vcc)	Operating Voltage Range	2.0V to 6.0V
Output Voltage (VOH)	High-Level Output Voltage (Min)	Vcc - 0.5V
Output Voltage (VOL)	Low-Level Output Voltage (Max)	0.5V
Input Voltage (VIH)	High-Level Input Voltage (Min)	0.7 * Vcc
Input Voltage (VIL)	Low-Level Input Voltage (Max)	0.3 * Vcc
Propagation Delay Time (tpd)	Typical Propagation Delay Time	10ns at Vcc = 5V, Ta = 25掳C
Power Dissipation (PD)	Maximum Power Dissipation	100mW
Operating Temperature (Ta)	Ambient Operating Temperature Range	-40掳C to +85掳C
Storage Temperature (Tstg)	Storage Temperature Range	-65掳C to +150掳C
Package Type	Encapsulation	DIP-14
Pin Configuration	Pin Layout	14-Pin Dual In-Line Package

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range (2.0V to 6.0V).
   • Connect the ground (GND) pin to a stable reference point.

2. Input Signals:

   • Apply input signals to the designated input pins (A, B, C) ensuring they meet the input voltage levels (VIH and VIL).

3. Output Signals:

   • The output signal will be high (VOH) when any of the inputs are low.
   • The output signal will be low (VOL) only when all inputs are high.

4. Temperature Considerations:

   • Operate the device within the specified temperature range (-40掳C to +85掳C) to ensure reliable performance.
   • Store the device within the storage temperature range (-65掳C to +150掳C) to prevent damage.

5. Handling and Installation:

   • Handle the device with care to avoid static discharge which can damage the internal circuitry.
   • Ensure proper alignment and secure connection during installation to prevent mechanical stress on the pins.

6. Power Dissipation:

   • Monitor the power dissipation to ensure it does not exceed the maximum rating (100mW) to avoid overheating and potential damage.

7. Testing:

   • Test the device under typical operating conditions to verify correct functionality.
   • Use a multimeter or oscilloscope to measure input and output voltages and propagation delay times.

By following these guidelines, you can ensure optimal performance and longevity of the HD14007UBP component.

(For reference only)