Details

---

BUY V23061-A1007-A302 https://www.utsource.net/itm/p/12607648.html

Parameter	Value	Unit
Part Number	V23061-A1007-A302	-
Description	High-Speed CMOS Camera	-
Sensor Type	CMOS	-
Resolution	2304 x 1536	Pixels
Frame Rate	60	fps
Pixel Size	3.0	渭m
Sensitivity	3500	mV/lux-sec
Dynamic Range	68	dB
Power Supply	3.3V / 1.8V	V
Power Consumption	300	mW
Operating Temperature	-20 to +85	掳C
Storage Temperature	-40 to +90	掳C
Interface	MIPI CSI-2	-
Package	LGA (Land Grid Array)	-
Dimensions	10.0 x 10.0 x 1.2	mm

Instructions:

1. Power Supply:

   • Connect the 3.3V and 1.8V power supplies to the respective pins on the camera module.
   • Ensure that the power supply is stable and within the specified range to avoid damage to the sensor.

2. Interface Connection:

   • Use a compatible MIPI CSI-2 interface to connect the camera module to your system.
   • Follow the pinout diagram provided in the datasheet for correct connection.

3. Operating Environment:

   • Operate the camera within the specified temperature range (-20掳C to +85掳C) to ensure optimal performance.
   • Store the camera in a dry environment with temperatures between -40掳C and +90掳C.

4. Initialization:

   • Initialize the camera using the provided initialization sequence in the datasheet.
   • Configure the camera settings such as resolution, frame rate, and exposure time according to your application requirements.

5. Handling:

   • Handle the camera module with care to avoid physical damage.
   • Use appropriate ESD (Electrostatic Discharge) protection measures when handling the module.

6. Firmware/Software:

   • Use the recommended firmware or software drivers to control the camera.
   • Refer to the user manual for detailed instructions on firmware updates and software installation.

7. Troubleshooting:

   • If the camera does not function as expected, check the power supply, connections, and configuration settings.
   • Refer to the troubleshooting section in the datasheet for common issues and solutions.

(For reference only)