Details

---

BUY MBD-3-N https://www.utsource.net/itm/p/12607650.html

Parameter	Description
Part Number	MBD-3-N
Type	Bridge Rectifier
Package	DO-207AD
Input Voltage	50V (Max)
Output Current	3A (Max)
Forward Voltage Drop (Vf)	1.0V (Typical @ 3A)
Reverse Voltage (Vr)	50V (Max)
Operating Temperature	-40掳C to +150掳C
Storage Temperature	-65掳C to +150掳C
Thermal Resistance (Rth)	20掳C/W (Junction to Case)
Mounting Type	Through-Hole
Polarity	Non-Polarized
Lead Spacing	27.8mm (1.09in)
Lead Diameter	1.27mm (0.050in)
Weight	1.2g

Instructions for Use:

1. Installation:

   • Ensure the PCB holes are large enough to accommodate the lead diameter.
   • Insert the component into the PCB, ensuring that the leads are aligned with the correct holes.
   • Solder the leads to the PCB, ensuring a good thermal connection.
   • Trim the leads if necessary to a length of about 1mm from the PCB surface.

2. Handling:

   • Handle the component by the body, not the leads, to avoid bending or damaging them.
   • Use appropriate tools and techniques to avoid excessive heat during soldering.

3. Operation:

   • Connect the input AC voltage to the two input terminals of the bridge rectifier.
   • The output DC voltage will be available across the two output terminals.
   • Ensure that the input voltage does not exceed the maximum rated voltage of 50V.
   • Do not exceed the maximum output current of 3A to prevent overheating and damage.

4. Thermal Management:

   • If operating at high currents, ensure adequate cooling to keep the junction temperature within the specified range.
   • Consider using a heatsink if the thermal resistance is insufficient for your application.

5. Storage:

   • Store the component in a dry, cool place away from direct sunlight and sources of heat.
   • Avoid exposure to corrosive environments or chemicals.

6. Disposal:

   • Dispose of the component according to local regulations for electronic waste.

(For reference only)