Details

---

BUY RTS3TA05 https://www.utsource.net/itm/p/12607655.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	1.6	-	5.5	V	Operating voltage range
Supply Current (Quiescent)	IQ	-	0.2	-	渭A	Quiescent current at no load
Output Voltage	VOUT	-	3.3	-	V	Regulated output voltage
Output Current	IOUT	-	500	-	mA	Maximum continuous output current
Dropout Voltage	VDROPOUT	-	0.3	-	V	Voltage difference between input and output
Load Regulation	-	-	0.5	-	%	Change in output voltage with load
Line Regulation	-	-	0.1	-	%	Change in output voltage with input voltage
Ripple Rejection	-	-	60	-	dB	Attenuation of input ripple at the output
Operating Temperature	Toper	-40	-	85	掳C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	掳C	Temperature range for storage
Package Type	-	-	-	-	SOT-23	Package type

Instructions for Use:

1. Power Supply Connection:

   • Connect the VDD pin to the positive supply voltage.
   • Connect the GND pin to the common ground.

2. Output Connection:

   • Connect the VOUT pin to the load or circuit requiring the regulated output voltage.

3. Capacitors:

   • Place a 1 渭F ceramic capacitor between VDD and GND as close to the regulator as possible to ensure stability.
   • Place a 1 渭F ceramic capacitor between VOUT and GND to filter the output and reduce ripple.

4. Thermal Management:

   • Ensure adequate heat dissipation if operating at high output currents, especially in high ambient temperatures.
   • Consider using a heatsink if necessary.

5. Operating Conditions:

   • Ensure the input voltage is within the specified range (1.6V to 5.5V).
   • Do not exceed the maximum output current of 500 mA continuously.
   • Operate within the specified temperature range (-40掳C to 85掳C).

6. Storage:

   • Store the device in a dry environment within the storage temperature range (-65掳C to 150掳C).

7. Handling:

   • Handle the device with care to avoid damage to the pins and package.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage to the device.

8. Testing:

   • Test the output voltage and current to ensure the regulator is functioning correctly.
   • Verify the ripple rejection and load regulation to meet the required specifications.

(For reference only)