Details

---

BUY KBU1010 10A 1000V https://www.utsource.net/itm/p/12607659.html

Parameter	Symbol	Min	Typical	Max	Unit
Maximum Repetitive Peak Reverse Voltage	VRRM	-	1000	-	V
Maximum RMS Voltage	VRMS	-	707	-	V
Maximum DC Blocking Voltage	VDC	-	1000	-	V
Maximum Average Rectified Output Current (Tc = 100掳C)	IOMAX	-	10	-	A
Maximum Non-Repetitive Peak Surge Current (8.3/400渭s, Tj = 25掳C)	IFSM	-	1000	-	A
Junction Temperature	TJ	-55	-	150	掳C
Storage Temperature	TS	-55	-	150	掳C
Operating Temperature	TO	-55	-	125	掳C

Instructions for Use:

1. Voltage Rating:

   • Ensure that the maximum repetitive peak reverse voltage (VRRM) does not exceed 1000V.
   • The maximum RMS voltage (VRMS) should not exceed 707V.
   • The maximum DC blocking voltage (VDC) is 1000V.

2. Current Rating:

   • The maximum average rectified output current (IOMAX) at a case temperature (Tc) of 100掳C is 10A.
   • For non-repetitive peak surge currents (IFSM), the device can handle up to 1000A for a pulse width of 8.3/400渭s at a junction temperature (Tj) of 25掳C.

3. Temperature Considerations:

   • The junction temperature (TJ) should be kept between -55掳C and 150掳C.
   • The storage temperature (TS) range is from -55掳C to 150掳C.
   • The operating temperature (TO) should be within -55掳C to 125掳C.

4. Mounting and Handling:

   • Use appropriate heat sinks to manage thermal dissipation, especially when operating near the maximum current and temperature limits.
   • Handle the device with care to avoid mechanical damage or static discharge, which can affect performance.

5. Electrical Connections:

   • Ensure proper soldering techniques to avoid cold solder joints and ensure good electrical contact.
   • Use wire gauges and connectors that can handle the rated current without excessive resistance or heating.

6. Testing and Verification:

   • Before finalizing the design, test the device under actual operating conditions to verify its performance and reliability.
   • Regularly inspect and maintain the device to ensure it continues to operate within specified parameters.

(For reference only)