Details

---

BUY EE-SH3 https://www.utsource.net/itm/p/12607660.html

Parameter	Description
Part Number	EE-SH3
Type	Photoelectric Sensor, Reflective Type
Detection Distance	50 mm to 200 mm
Output Type	NPN, NO (Normally Open)
Supply Voltage	DC 10 to 30 V
Current Consumption	Max. 40 mA
Response Time	Max. 1 ms
Operating Temp.	-25掳C to +70掳C
Storage Temp.	-40掳C to +80掳C
Cable Length	Approx. 2 m
Material	Resin
Weight	Approx. 20 g

Instructions:

1. Installation:

   • Ensure the sensor is mounted in a stable position where it can effectively detect objects within its detection range.
   • The reflective plate should be aligned directly opposite the sensor at the desired detection distance.

2. Wiring:

   • Connect the brown wire to the positive terminal of the power supply.
   • Connect the blue wire to the negative terminal of the power supply.
   • Connect the black wire to the input of the control device.

3. Power Supply:

   • Provide a DC voltage between 10V and 30V to the sensor.

4. Operation:

   • When an object interrupts the beam path between the sensor and the reflective plate, the output switches from OFF to ON.
   • Ensure that the operating environment does not exceed the specified temperature ranges.

5. Maintenance:

   • Regularly check the alignment of the sensor and reflective plate.
   • Keep the sensor surface clean to ensure optimal performance.

6. Caution:

   • Avoid exposing the sensor to environments with excessive dust or moisture.
   • Do not apply voltage exceeding the rated supply voltage.

(For reference only)