Details

---

BUY 2SK1518 https://www.utsource.net/itm/p/12607666.html

Parameter	Symbol	Min	Typ	Max	Unit
Drain-to-Source Voltage	V_DS	-	-	450	V
Gate-to-Source Voltage	V_GS	-15	-	15	V
Drain Current	I_D	-	10	-	A
Gate Threshold Voltage	V_GS(th)	2	4	6	V
Input Capacitance	Ciss	-	2700	-	pF
Output Capacitance	Coss	-	350	-	pF
Reverse Transfer Capacitance	Crss	-	190	-	pF
Total Power Dissipation	P_TOT	-	-	220	W
Junction Temperature	T_J	-55	-	150	掳C
Storage Temperature	T_STG	-55	-	150	掳C

Instructions for Use:

1. Handling Precautions:

   • Avoid exceeding the maximum ratings to prevent damage to the device.
   • Use proper ESD (Electrostatic Discharge) protection when handling the device.

2. Mounting:

   • Ensure good thermal management by using a heatsink if necessary, especially when operating near the maximum power dissipation.
   • Mount the device securely to avoid mechanical stress on the leads.

3. Biasing:

   • Apply gate-to-source voltage (V_GS) within the specified range to ensure proper operation.
   • Ensure the gate threshold voltage (V_GS(th)) is met to turn the device on.

4. Operation:

   • Monitor the junction temperature (T_J) to ensure it stays within the safe operating range.
   • Check the drain current (I_D) and drain-to-source voltage (V_DS) to avoid overheating and potential failure.

5. Testing:

   • Perform initial testing at lower power levels to verify correct operation before moving to full load conditions.
   • Use appropriate test equipment to measure key parameters such as V_DS, I_D, and V_GS.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect against static and physical damage.

(For reference only)