Details

---

BUY RFD8P05 https://www.utsource.net/itm/p/12607671.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Drain-Source Voltage	VDS	-	50	100	V	Maximum voltage between drain and source with gate open
Gate-Source Voltage	VGS	-20		+20	V	Maximum voltage between gate and source
Continuous Drain Current	ID	-	5.0	5.0	A	Continuous current at TA = 25°C
Pulse Drain Current	ID pul	-	10.0	10.0	A	Peak pulse current (tp ≤ 300 μs)
Power Dissipation	PD	-	1.25	1.25	W	Maximum power dissipation at TA = 25°C
Junction Temperature	TJ	-		150	°C	Maximum junction temperature
Storage Temperature	TSTG	-55		150	°C	Operating temperature range

Instructions for Use:

1. Voltage Handling:

   • Ensure that the drain-source voltage (V_DS) does not exceed 100V to prevent damage.
   • The gate-source voltage (V_GS) should be kept within ±20V to avoid gate oxide breakdown.

2. Current Handling:

   • The continuous drain current (I_D) should not exceed 5A at ambient temperature (T_A) of 25°C.
   • For pulse applications, the peak pulse current (I_{D pul}) can reach up to 10A for pulses lasting no longer than 300 μs.

3. Power Dissipation:

   • The maximum power dissipation (P_D) is 1.25W at an ambient temperature of 25°C. Ensure adequate heat sinking if operating near this limit.

4. Temperature Management:

   • The junction temperature (T_J) must not exceed 150°C to ensure reliable operation.
   • Store the device in an environment where the temperature ranges from -55°C to 150°C.

5. Mounting and Handling:

   • Handle the device with care to avoid mechanical stress.
   • Use appropriate thermal management techniques, such as heatsinks or cooling fans, especially in high-power applications.

6. Electrostatic Discharge (ESD) Protection:

   • The device is sensitive to ESD. Use proper ESD protection measures during handling and installation.

7. Testing and Verification:

   • Before final assembly, verify all electrical parameters to ensure the device meets the specified ratings.
   • Perform regular maintenance checks to ensure ongoing performance and reliability.

(For reference only)