Details

---

BUY UA79GU1C https://www.utsource.net/itm/p/12607672.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VI	2.0	-	30	V	Operating input voltage range
Output Voltage	VO	-	1.0	-	V	Fixed output voltage
Output Current	IO	-	1.0	1.5	A	Maximum continuous output current
Dropout Voltage	VD	-	1.5	2.5	V	Dropout voltage at IO = 1.0A
Quiescent Current	IQ	-	5	10	mA	Quiescent current
Line Regulation	-	-	0.01	0.1	%/V	Change in output voltage with VI
Load Regulation	-	-	0.1	1.0	%/A	Change in output voltage with IO
Thermal Shutdown	TSD	-	160	180	掳C	Thermal shutdown temperature
Storage Temperature	TSTG	-65	-	150	掳C	Temperature range for storage

Instructions for Using UA79GU1C

1. Power Supply Connection:

   • Connect the input voltage (VI) to the input pin.
   • Ensure the input voltage is within the specified range (2.0V to 30V).

2. Output Configuration:

   • The output voltage (VO) is fixed at 1.0V.
   • Connect the load to the output pin.

3. Grounding:

   • Connect the ground (GND) pin to the common ground of the circuit.

4. Heat Dissipation:

   • If the device is expected to operate at high output currents, ensure proper heat dissipation by using a heatsink or thermal pad.
   • Monitor the temperature to avoid exceeding the thermal shutdown threshold (160掳C to 180掳C).

5. Capacitors:

   • Use appropriate input and output capacitors to stabilize the voltage and reduce ripple.
   • Typical values are 10渭F for input and 10渭F for output, but these can vary based on specific application requirements.

6. PCB Layout:

   • Place the device close to the load to minimize trace resistance and inductance.
   • Ensure good PCB layout practices to reduce noise and improve performance.

7. Testing:

   • Before finalizing the design, test the circuit under various conditions to ensure stability and performance.
   • Measure the output voltage and current to verify that they meet the specifications.

8. Storage:

   • Store the device in a dry environment within the specified storage temperature range (-65掳C to 150掳C).

By following these instructions, you can ensure optimal performance and reliability of the UA79GU1C in your application.

(For reference only)