Details

---

BUY MPSA18 https://www.utsource.net/itm/p/12607681.html

Below is the parameter table and instructions for the MPSA18 NPN Silicon Transistor:

MPSA18 Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	30	V
Collector-Base Voltage	VCBO	-	-	45	V
Emitter-Base Voltage	VEBO	-	-	6	V
Collector Current	IC	-	-	500	mA
Base Current	IB	-	-	50	mA
Power Dissipation	PT	-	-	625	mW
Operating Temperature Range	TJ	-55	-	150	掳C
Storage Temperature Range	TSTG	-65	-	150	掳C
DC Current Gain (hFE)	-	100	400	700	-
Transition Frequency	fT	-	150	-	MHz

Instructions for Using MPSA18

1. Handling:

   • Handle the MPSA18 with care to avoid damage from electrostatic discharge (ESD).
   • Use proper anti-static wrist straps and mats when handling the device.

2. Mounting:

   • Ensure that the transistor is mounted on a suitable heat sink if it will be operating near its maximum power dissipation.
   • Follow the recommended soldering temperature and time to avoid thermal shock.

3. Biasing:

   • Ensure that the base current (I_B) is sufficient to fully turn on the transistor but not so high as to exceed the maximum base current rating.
   • Use a base resistor to limit the base current and protect the transistor from overdrive.

4. Operating Conditions:

   • Do not exceed the maximum collector-emitter voltage (V_CEO), collector-base voltage (V_CBO), or emitter-base voltage (V_EBO).
   • Keep the junction temperature (T_J) within the specified range to ensure reliable operation.

5. Storage:

   • Store the MPSA18 in a dry, cool place away from direct sunlight and extreme temperatures.
   • Keep the device in its original packaging until ready for use to protect against static damage.

6. Testing:

   • Use a multimeter or transistor tester to verify the functionality of the MPSA18 before installation.
   • Test the transistor under controlled conditions to avoid damaging the device or the test equipment.

By following these guidelines, you can ensure the reliable and efficient operation of the MPSA18 NPN Silicon Transistor in your circuits.

(For reference only)