Details

---

BUY J107 https://www.utsource.net/itm/p/12607683.html

Parameter	Value	Unit
Type	Junction Field-Effect Transistor (JFET)	-
Drain-Source Voltage (VDS)	30	V
Gate-Source Voltage (VGS)	卤20	V
Drain Current (ID)	8	mA
Input Capacitance (Ciss)	10	pF
Output Capacitance (Coss)	2.5	pF
Power Dissipation (PTOT)	200	mW
Operating Temperature Range	-65 to +150	掳C
Package Type	TO-92	-

Instructions for Using J107 JFET:

1. Handling:

   • Handle the J107 with care to avoid static damage. Use an ESD wrist strap if possible.
   • Avoid touching the leads directly; use pliers or other tools when necessary.

2. Mounting:

   • Ensure the J107 is mounted on a suitable PCB or breadboard.
   • Solder the leads quickly to prevent overheating. The maximum soldering temperature should not exceed 300掳C for more than 10 seconds.

3. Biasing:

   • For typical applications, bias the gate relative to the source to control the drain current.
   • Use a voltage divider or a potentiometer to set the gate voltage.

4. Operation:

   • Ensure the drain-source voltage (V_DS) does not exceed 30V to avoid damaging the device.
   • Keep the gate-source voltage (V_GS) within 卤20V to prevent gate breakdown.
   • Monitor the power dissipation (P_TOT) to ensure it does not exceed 200mW. Use a heatsink if necessary.

5. Testing:

   • Test the J107 using a multimeter or a transistor tester to verify its functionality.
   • Check the continuity between the leads and measure the gate-to-source and drain-to-source resistances.

6. Storage:

   • Store the J107 in a dry, cool place away from direct sunlight.
   • Keep the device in an anti-static bag to protect it from ESD.

By following these guidelines, you can ensure optimal performance and longevity of the J107 JFET.

(For reference only)