Details

---

BUY N80188 https://www.utsource.net/itm/p/12607686.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	2.7	-	5.5	V
Operating Current	Icc	-	200	-	渭A
Input High Voltage	VIH	2.0	-	5.5	V
Input Low Voltage	VIL	0	-	0.8	V
Output High Voltage	VOH	2.4	-	Vcc	V
Output Low Voltage	VOL	0	-	0.4	V
Propagation Delay Time	tpd	-	10	-	ns
Storage Temperature	Tstg	-40	-	85	掳C
Operating Temperature	Topr	-40	-	85	掳C

Instructions for Using N80188

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 5.5V.
   • Connect the Vcc pin to the positive power supply and GND pin to the ground.

2. Input Signals:

   • For a valid high input, the voltage should be between 2.0V and 5.5V.
   • For a valid low input, the voltage should be between 0V and 0.8V.

3. Output Signals:

   • The output high voltage (VOH) will be at least 2.4V and can go up to the supply voltage (Vcc).
   • The output low voltage (VOL) will be no more than 0.4V.

4. Propagation Delay:

   • The typical propagation delay time (tpd) is 10 nanoseconds. This is the time it takes for the output to respond to a change in the input signal.

5. Temperature Considerations:

   • The device can operate within a temperature range of -40掳C to 85掳C.
   • Store the device in an environment with temperatures ranging from -40掳C to 85掳C to ensure long-term reliability.

6. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Use proper anti-static wrist straps and mats when handling the device.

7. Application Notes:

   • Refer to the datasheet for detailed application notes and specific use cases.
   • Ensure all connections are secure and free from short circuits or open circuits.

By following these guidelines, you can ensure optimal performance and reliability of the N80188 component in your electronic designs.

(For reference only)