Details

---

BUY TIC226M https://www.utsource.net/itm/p/12607690.html

Parameter	Symbol	Min	Typical	Max	Unit
Forward Voltage	VF	-	1.2	1.5	V
Peak Forward Current	IF(surge)	-	-	50	A
Continuous Forward Current	IF	-	3	5	A
Reverse Blocking Voltage	VBR	400	-	600	V
Power Dissipation	PT	-	-	125	W
Junction Temperature	TJ	-55	-	150	掳C
Storage Temperature	TSTG	-55	-	150	掳C

Instructions for Using TIC226M:

1. Mounting:

   • Ensure the device is mounted on a heatsink to dissipate heat effectively, especially when operating at high currents.
   • Use thermal grease or a thermal pad between the device and the heatsink to improve thermal conductivity.

2. Wiring:

   • Connect the anode (A) and cathode (K) terminals correctly to avoid reverse polarity, which can damage the device.
   • Use short, thick wires to minimize inductance and resistance.

3. Current Limiting:

   • Use a current-limiting resistor or a current control circuit to prevent exceeding the maximum continuous forward current (I_F) and peak forward current (I_F(surge)).

4. Voltage Protection:

   • Ensure that the reverse blocking voltage (V_BR) is not exceeded to prevent breakdown and potential damage.
   • Consider using a snubber circuit (RC network) to protect against voltage spikes during switching.

5. Thermal Management:

   • Monitor the junction temperature (T_J) to ensure it does not exceed 150掳C. Use a temperature sensor if necessary.
   • Allow adequate ventilation around the device to help with cooling.

6. Storage:

   • Store the device in a dry, cool place within the storage temperature range (-55掳C to 150掳C).
   • Avoid exposure to high humidity and corrosive environments.

7. Handling:

   • Handle the device with care to avoid mechanical stress, which can cause internal damage.
   • Use ESD (Electrostatic Discharge) protection when handling to prevent damage from static electricity.

8. Testing:

   • Test the device under controlled conditions before deploying it in a final application.
   • Verify all connections and parameters to ensure proper operation.

By following these guidelines, you can ensure reliable and safe operation of the TIC226M thyristor.

(For reference only)